coal gangue crusher machine

coal gangue crusher machine Introduction

There are two kinds of coal gangue crusher, one is the roll crusher, the other is the teeth roll crusher. The roller crusher is suitable for feed particle size less than 80mm, the teeth roller crusher is suitable for feed particle size less than 1000mm, and their finished product particle size requires 50μm-20mm fine crushing operation. Such as the use of pebbles, construction waste artificial sand; Mining fine iron ore, quartz stone; The ceramic industry crushers raw materials. It is suitable for the coarse and intermediate crushing of brittle bulk materials in cement, chemical industry, electric power, mining, metallurgy, building materials, refractory materials, coal mining and other industries, with large inlet particle size and adjustable discharge particle size, and can be crushed against materials with compressive strength <160MPa. Especially in the coal industry, the use of this machine to crusher raw coal, as long as the iron removal, impurity removal, no need to remove dirt, it can be directly broken, broken materials, uniform particle size, low crushing rate, thus simplifying the coal preparation process, reducing investment and production costs.

There are hydraulic type and spring type for both roll crusher and teeth roll crusher.

spring type:

hydraulic type:

The shape of the roller and the teeth roller is the same, and the roller used inside is not the same.

roller crusher:

teeth crusher:

Images

Advantages

Working Principles

Technical parameters